Custom Casting Services
Need small batches of custom metal parts? Our aluminum and zinc casting delivers near-net-shape parts, finished to spec in-house by our CNC team,with cost-effective tooling and fast ramp-up, from one-off prototypes to low-volume production.
DFM
DFM Review Before Tooling and Production
Material
Aluminum, Zinc, Steel, Iron, Copper and Alloys
Quantity
Full-process quality control and on-time delivery.
Process & Finish
CNC machining, heat treatment, anodizing, powder coating and plating ,one partner from casting to finished part.
Start A Casting Parts Quote
Secure & Confidential
Upload Your CAD Files & Start Your Casting Quote
To review your casting project quickly, please send your CAD file, target material, casting process, quantity, tolerance requirements, CNC post-machining needs and surface finishing requirements.
STEP / STP / IGES / SLDPRT / IPT / PRT / PDF drawings
- No MOQ required. All uploaded files are secure and confidential. Engineering response within 24 hours. NDA available upon request.
A More Reliable Way to Source Custom Cast Metal Parts
Tik Precision coordinates casting DFM review, tooling, casting production, CNC post-machining and final inspection to deliver custom metal parts that meet your drawing requirements.
From casting review to finished metal parts, every step is controlled.
Tik Precision helps reduce casting project uncertainty before tooling and production start, especially for complex geometry, material selection, CNC finishing and batch consistency requirements.
Casting DFM Review
Confirm alloy, geometry, wall thickness, draft angles, tolerances and machining allowances before tooling.
Tooling & Casting Production
Prepare tooling, validate trial castings and control casting production and cleanup.
CNC Machining & Final Inspection
Machine critical features, complete required finishing, then inspect and document parts before shipment.
DFM Review
Drawing & Material Review
Review drawings, alloy, wall thickness, draft angles, tolerances and machining allowances before tooling.
Tooling & Casting
Cast Blank Production
Prepare tooling, validate trial castings and produce cast blanks, then remove gates and flash and clean the castings.
CNC Machining
Critical Feature Machining
CNC-machine specified bores, threads, sealing faces and mounting surfaces to achieve drawing requirements.
Inspect & Deliver
Final Verification & Shipment
After required finishing, verify dimensions and quality requirements, prepare inspection records and pack parts for shipment.
Advanced Casting Capabilities for Custom Metal Parts
Tik Precision offers integrated casting and precision machining solutions, from raw castings to finished components, helping reduce supplier coordination and improve quality control.
Strong cast parts for larger and thicker geometries
Ideal for larger or thicker parts that require good strength, lower porosity and stable structural integrity across repeat batches.
Best For
- Aerospace structural parts
- Machinery housings
- Automotive lightweight components
- Functional prototypes
Low porosity · Strong structural integrity
Efficient casting for thin-wall and detailed parts
Suitable for complex metal parts with fine details, high dimensional accuracy, smooth surface finish and cost efficiency at suitable production volumes.
Best For
- Electronics housings
- Heat sinks
- Automotive brackets
- Machinery enclosures
Fine details · High repeatability
Durable casting for simpler metal components
A practical option for simpler geometries that require durability, mechanical strength and cost efficiency for medium-volume production.
Best For
- Aluminum housings
- Automotive structural parts
- Medium-volume industrial components
- Durable machinery parts
Durable parts · Reusable mold cost control
Low-Pressure Casting
Best for larger, thicker cast parts requiring strength, low porosity and stable structural integrity.
High-Pressure Casting
Best for thin-wall, detailed parts requiring dimensional accuracy, repeatability and cost-efficient production.
Best for simpler durable metal parts, aluminum housings and medium-volume industrial components.
From CAD File to Finished Cast Parts
A clear overview of how your casting project moves through Tik Precision, from CAD review and process selection to tooling, casting, CNC finishing, inspection and delivery.
Send CAD Files
Share CAD files, drawings, material, quantity, tolerance, surface finish and post-machining requirements.
Output: clear casting project information for review.
Casting DFM Review
Our team reviews casting feasibility, wall thickness, draft angle, material choice, tooling risks and CNC finishing needs.
Output: practical DFM notes and process recommendation.
Tooling, Casting & CNC Finishing
Parts move through tooling, casting production, deburring, CNC post-machining, surface finishing and key inspection points.
Output: controlled cast parts with finished critical features.
Inspect, Ship & Support
Finished cast parts are inspected, packed, shipped and supported for first articles, production batches or repeat orders.
Output: delivered parts, inspection records and reorder support.
Designed for engineering and purchasing teams that need casting feasibility review, controlled production and clear project visibility.
Quality Assurance Built Into Every CNC Machined Part
From material verification to final dimensional inspection, Tik Precision uses controlled inspection steps and precision measurement equipment to keep parts consistent before shipment.
Incoming Material Check
Material certificates, visual checks and requirement review before machining starts.
In-Process Control
First article checks, patrol inspection and process monitoring during machining.
Final Dimensional Inspection
Critical dimensions, surface finish, function and cosmetic requirements are verified.
Outgoing & Shipping Verification
Packaging, labeling, report generation and shipment readiness are checked before dispatch.
Industries We Serve
Casting Solutions for Industrial Applications
We support industries that need durable cast metal parts, complex housings, structural components and CNC post-machined features with reliable batch consistency.
Aerospace / Model Aviation
- Lightweight cast housings
- Structural brackets and mounts
- Functional prototype castings
- CNC-finished critical surfaces
Energy & Power
- Power equipment housings
- Heat dissipation components
- Mounting bases and covers
- Cast parts with CNC finishing
Medical Devices
- Device housings and covers
- Equipment brackets
- Non-implant metal components
- Inspection-ready cast parts
Electronics & Semiconductor
- Die-cast electronics housings
- Heat sinks and thermal parts
- Equipment frames and covers
- Precision post-machined features
Robotics
- Robot joint housings
- Motor and sensor covers
- Cast mounting brackets
- CNC-finished assembly features
Optics & Instruments
- Instrument housings
- Optical equipment covers
- Mounting bases
- Precision cast brackets
Automotive
- Automotive brackets
- Lightweight aluminum housings
- Structural cast components
- CNC-finished mounting surfaces
Industrial Machinery
- Machinery housings
- Pump and valve bodies
- Durable cast components
- Medium-volume industrial parts
Not sure if your part is suitable for casting?
Send your drawing, material, quantity and application. Our engineers will review casting feasibility, process selection and CNC finishing requirements.
CastingServices FAQs
Find quick answers about Casting processes, wear resistance, corrosion protection, material compatibility, lead time and drawing specifications.
Questions Buyers Ask Before Finishing
These answers help engineering and purchasing teams understand finish selection, material compatibility, wear resistance, corrosion protection, lead time and drawing requirements before requesting a quote.
Precision die casting – aluminum, zinc, magnesium, and copper-based alloys. Suitable for high-volume production (10,00+ units).
Typical ±0.05 mm to ±0.10 mm depending on part size and geometry. Tighter tolerances available with secondary CNC machining.
Down to 0.5mm depending on material, part geometry, and flow characteristics.
Tooling: 4–6 weeks. First articles: 1–2 weeks after tooling completion. Production lead times: 2–4 weeks depending on volume.
In-process inspections, dimensional reports, and material certifications. Secondary CMM inspection available for critical features.
Choose casting for volumes above 10,00 units – lower per-part cost. Choose CNC machining for low volumes, tight tolerances (±0.002 mm), or thin walls (0.05 mm) not achievable in casting.