High-Volume CNC Machining | Bulk & Large-Scale Production
Tik Precision provides high-volume CNC machining for precision parts made to customer drawings. We handle production runs of 1,000 pieces and above, using 3-axis to 5-axis milling and CNC turning. Each program starts with DFM review and first article inspection. After approval, the process is recorded in a control plan and reused for every lot, with inspection records kept for each shipment.
[ 0.05mm ]
Standard machining tolerance. Precision-grade features down to 0.002 mm.
[ 3- to 5 axis ]
CNC milling, plus CNC turning
1,000+ pcs
Production runs per order, quoted per drawing
FAI, MTR, CoC
Inspection and material documents available on request
Request a High-Volume Production Quote
Submit Your Drawing
Upload your CAD files and PDF drawings with your expected lot size and annual volume. Our engineers review them for manufacturability and reply within 24 hours.
We machine only to customer drawings. We do not sell standard parts.
STEP / STP / SLDPRT / IPT / PRT / SAT / PDF drawings
- Engineering response within 24 hours · NDA available on request · Build-to-print only
Our High-Volume CNC Production Process
Cost and consistency over a long run are largely determined before the first lot is released. Each program follows the same five steps.
01
DFM Review
We review datums, GD&T, tolerance stack-up, material and surface finish, and identify features that may affect cost, yield or lead time before we quote.
02
Process Planning
We define the operation sequence, workholding, cutting tools, programs and cycle time for the full order quantity.
03
First Article & Pilot Run
First article parts are fully inspected against the drawing. A pilot run can be made before production release.
04
Control Plan & Release
After approval, the process is locked and recorded in the control plan, including gauges and inspection frequency.
05
Production & Delivery
Lots are machined, inspected and shipped to the agreed schedule. Repeat orders use the stored process records.
How We Keep Production Lots Consistent
Revision Control
Only approved NC programs and drawing revisions are released to production. All modifications are reviewed, authorised and documented.
Dedicated Fixtures
Recurring mass production parts use dedicated or modular fixtures to maintain identical datum references across every batch.
Tool Life & Gauging
Cutting tools are replaced at predefined service intervals. Critical characteristics are verified with dedicated gauges where applicable.
Lot Traceability
Material lot number, machining date and inspection records are retained for every production batch. SPC and Cpk data are available upon request.
Production capability
Specification
Processes
3-axis, 4-axis and 5-axis CNC milling; CNC turning; [mill-turn machining]
Part size
Subject to part geometry and fixturing.
Materials
Aluminum alloys, stainless steel, titanium, alloy and carbon steels, [other]
Tolerances
Standard machining tolerance of ±0.05 mm. Precision-grade features down to 0.002 mm, depending on part geometry, material and measurement method.
Order quantities
Prototype and pilot runs to production runs of 1,000 pieces and above, quoted per drawing
Order model
Production orders with scheduled releases and planned shipments
Quality system
Zeiss CMM, optical measuring system, roughness tester, hardness tester
Documents
First article inspection report, dimensional inspection report, certificate of conformance (CoC), material test report (MTR)
Capabilities depend on part geometry, material and fixturing. Send your drawing and we will confirm what applies to your part.
Our Production Capabilities
Our high-volume CNC machining capabilities cover 3-axis to 5-axis milling and CNC turning for build-to-print parts. Each program starts with DFM review and first article inspection, and repeat lots follow the same recorded process.
Our Engineering Team
Backed by our experienced engineering team, we offer high-volume 3‑axis to 5‑axis milling and CNC turning for build‑to‑print precision components.
Our team owns DFM assessment, FAI, pilot run and control plan deployment to lock in stable, repeatable processes for continuous mass production
Our High-Volume Manufacturing for Precision-Driven Industries
We support industries that need prototype validation, pilot runs, High-volume production and practical DFM feedback before scaling into repeat manufacturing.
Aerospace
- High-volume aluminum structural components
- Lightweight flight-critical parts
- Test fixtures & structural mounts
- DFM review for flight validation
Energy & Power
- High-volume production compressor components
- Compressor housing & manifold parts
- Cooling & protection covers
- Pilot-run power equipment parts
Medical Devices
- High-volume stainless components
- Medical device housing batches
- Inspection-ready pilot parts
- Test fixtures & assembly aids
Semiconductor
- High-volume chamber components
- Precision brackets and fixtures
- Repeatable parts for pilot equipment
- Equipment panels & frames
Robotics
- High-volume automation components
- Sensor housings & mounting brackets
- End-effector precision parts
- Robot arm validation prototypes
Optics & Instruments
- high-volume production fixture components
- Instrument housing validation batches
- Optical mounting brackets
- Precision covers and alignment parts
Automotive
- high-volume production validation parts
- Housing & bracket prototypes
- EV & battery machined components
- Pilot-run functional assemblies
Industrial Equipment
- Automation equipment prototypes
- Control box and panel components
- high-volume production replacement parts
- Repeat-order custom components
Not sure if your project fits our high-volume production capabilities?
Send your drawing, material, quantity and application. Our engineers will review the process route and provide practical DFM feedback.
High-Volume Production FAQs
Find quick answers about High-volume quotes, file formats, NDA support, DFM review, inspection reports and production-ready small-batch manufacturing.
Questions Buyers Usually Ask First
These answers help engineering and purchasing teams understand quoting requirements, file security, DFM feedback, inspection support and High-volume production options before starting a project.
We handle repeat and scheduled production runs of [range] pieces per batch. We also accept prototype and pilot quantities, so you can approve the part before moving to production.
Prototype and pilot orders have no fixed minimum. For production orders, quantities are quoted per drawing based on the part, material and process.
It depends on the part and the approval steps. After the first article is approved, we confirm the process plan and schedule with you before the production run.
We record the approved process, fixtures, tools and inspection points, and use the same plan for each batch. Critical dimensions are checked in-process and recorded.
Yes. A large order can be split into planned shipments to match your production or stock schedule.
Files are used only for your quote and order. We can sign an NDA on request before you send drawings.
STEP, STP, SLDPRT, IPT, PRT, SAT and PDF drawings. A PDF with tolerances is recommended alongside the 3D file.
We machine only to customer drawings and specifications. We do not sell standard parts.