CNC Machining & Inspection
Equipment
With 70+ in-house CNC advanced machines and end-to-end quality control, we select
the manufacturing route around your drawing, material and project
requirements — machined to spec, delivered on time.
- 5-Axis Machining Centers · CNC Milling · CNC Turning · Mill-Turn
- ZEISS CMM · In-Process & Final Inspection
- Prototype to Low-Volume Production · Tight Tolerances
Manufacturing Capability Overview
Modern Equipment for Precision Production
Our equipment capability covers milling, turning, 5-axis machining, mill-turn machining, grinding, surface finishing and inspection support, allowing different manufacturing routes to be selected according to geometry, material, tolerance and order volume.
01
5-Axis Machining
Used for complex geometry, multi-angle features, aerospace parts and difficult-to-machine surfaces.
- Typical partsComplex geometry, aerospace parts etc.
- Process5-axis machining
Complex geometry support
02
CNC Milling
Supports prismatic parts, housings, brackets, fixtures, plates and complex milled features.
- Typical partsHousings, brackets, fixtures, plates
- ProcessCNC milling
3-axis / 4-axis / 5-axis
03
CNC Turning
Suitable for shafts, sleeves, bushings, threaded parts, round components and precision turned features.
- Typical partsShafts, sleeves, bushings, threaded parts
- ProcessCNC turning
Round part production
04
Mill-Turn Machining
Combines milling and turning for rotating parts with milled features.
- Typical partsImpeller hubs, valve bodies, sensor housings
- ProcessMill-turn machining
Fine detail machining
05
Grinding
Helps improve flatness, surface finish and precision dimensions for selected metal components.
- Typical partsFlatness, surface finish
- ProcessGrinding
Precision surface control
06
Inspection Support
Supports dimensional and final quality checks on machined parts.
- Typical partsCMM, optical vision systems, hardness and roughness testers,dynamic balancing equipment
- ProcessDimensional, visual, final
Quality verification
- Machine Categories
Core Equipment for Different Manufacturing Requirements
Different parts require different machining routes. Our equipment categories support milled parts, turned components, complex multi-axis features, fine-detail machining, precision surfaces and final inspection needs.
5-Axis Machining Center
24 Five-Axis Machining Centers — Built for Complex Parts Our 5-axis workshop machines complex parts for aerospace, medical, semiconductor, robotics, energy, optical and automotive industries in a single setup, held to ±0.002 mm. Patented impeller-clamping fixtures enable full-access machining of complex geometries — no re-clamping, no accumulated error.
CNC Milling Center
CNC milling equipment supports housings, brackets, plates, fixtures, prototypes and production parts with complex pockets, holes, slots and milled surfaces.
CNC Turning Center
CNC turning equipment is used for shafts, sleeves, bushings, threaded parts, cylindrical components and precision round features for prototype and production orders.
Inspection Equipment Center
Our inspection center is equipped with spectrometers, ZEISS CMMs, optical vision systems, hardness and roughness testers, height gauges, micrometers, thread gauges and dynamic balancing equipment. We verify material composition, critical dimensions, geometric tolerances, hardness and surface finish against drawing and order requirements, and dynamic-balance applicable rotating components. All inspection records are retained for traceability.
- Equipment Capacity Matrix
Match Equipment Type with Manufacturing Requirements
Different equipment groups are selected according to geometry, tolerance, material, feature complexity and production volume. This matrix helps buyers understand which process may fit each part requirement.
- Equipment FAQ
Common Questions About Manufacturing Equipment
These answers help buyers understand equipment selection, process capability, production capacity and inspection support before sending drawings or RFQ details.
Please provide CAD files, 2D drawings, material grade, quantity, tolerance notes and surface finish requirements for a more accurate process review.
Our equipment capability includes CNC milling, CNC turning, 5-axis machining, Mill-Turn machining, grinding and inspection equipment for different part geometries and production needs.
Yes. Equipment and process selection can be adjusted for prototypes, low-volume production and repeat orders based on material, tolerance, quantity and delivery requirements.
5-axis machining is useful for complex geometry, multi-angle features, parts that require fewer setups, and components with tight positional or surface requirements.
Yes. Inspection support can include dimensional checks, thread verification, CMM inspection, visual review and final quality checks according to project requirements.
Please send CAD files, 2D drawings, material, tolerance notes, surface finish and order quantity. Our engineering team can review the part and recommend a suitable manufacturing route.
Looking for the Right Machining Capability ?
Send your CAD files, 2D drawings, material grade, tolerance requirements and expected quantity. Our engineering team can review your part and recommend a suitable machining process and equipment route.